Changing Tires
In this guide, we will show you step by step how to change the tire on your VMAX e-scooter yourself.
Required Tools
- 14 mm wrench
- 17 mm wrench
- Tire lever
- Pliers
- Optional: installation paste or lubricant
- Optional: compressor
- Optional: 3 cable ties
Instructions
Prepare the Wheel
Fully loosen the brake cable with the 14 mm wrench. Then, using the 17 mm wrench, loosen the wheel nuts on both sides and carefully pull the wheel out.
Remove the spacers and take out the drum brake.
Then place the wheel on a stable surface or secure it gently. Be careful not to damage the axle or the cable outlet.
Prepare the Tire and Release Air
If necessary, apply some installation paste or lubricant around the tire.
Then release all the air from the tire before proceeding to the next step.
Loosen Tire from the Rim
First, use tire levers to loosen one side of the tire from the rim. Carefully place the lever on the tire and work your way around slowly until one side of the tire is completely free.
Once one side of the tire is loose, you can carefully remove the rim from the tire using a bit of force.
Be cautious to avoid unnecessary damage to both the tire and the rim.
Reassemble Tire
Prepare the tire and rim again with some installation paste or lubricant. Insert the rim back into the tire and then reinstall the tire onto the rim with the tire levers.
Tip: If you pull one side of the tire together with 3 cable ties, it often makes it significantly easier to pry the tire onto the rim.
Inflate Tire and Check Fit
First, inflate the tire with a compressor to approximately 3.0 Bar. If necessary, then release some air to adjust the correct pressure.
Check if the tire holds air and is correctly seated.
After that, remove any residues of installation paste or lubricant.
Reassemble Wheel
Then reattach the wheel to the VMAX e-scooter and correctly insert all removed parts like spacers and drum brake.
Secure all fasteners tightly and check the correct fit of the wheel before riding.
Check Result
After assembly, check if the tire holds the air pressure and if the wheel is mounted correctly. Pay special attention to the secure fit of all loosened parts as well as the free rotation of the wheel.
Frequently Asked Questions
Here you will find answers to common questions about this repair.
What should I do if I have difficulty loosening the tire from the rim?
Work evenly with the tire levers and use some installation paste or lubricant if necessary.
How can I tell if the tire is mounted correctly?
The tire should be evenly seated on the rim and hold the air pressure.
Can I abort the repair if I'm unsure?
Yes. If you are unsure, it is better to have the scooter checked by a service center.