Your new VX2 EXTREME

Your new VX2 PRO You read Your new VX2 EXTREME 3 Minutes Next Your new VX2 HUB

Your parcel has just arrived!

We're just as pleased as you are. But before you get started, there are a few important things to consider:

  1. Tire pressure

    During the time in the box, the tires may have lost some pressure. Riding with too little pressure can cause a lot of damage to the scooter, as an important task of the tires is to cushion the scooter.
    Therefore, it is essential to pump up both tires before the first ride. Depending on the weight of the rider, the tire pressure should be between 2.5 and 3.0 bar.

  2. Drum brake

    The mechanical drum brake of the scooter must be adjusted to your weight before riding.
    To do this, turn the adjustment wheel at the bottom of the Bowden cable either a little further up (the brake will then grip more firmly) or down (the brake will then grip more gently).

  3. Recuperation brake

    The electric motor brake is a recuperation brake. If the scooter is switched off or the motor has a low speed, there is only a very low braking force.
    To prevent the scooter from rolling away on a slope, for example, always use the left combination brake.

  4. App connections

    The app provides you with lots of useful information about your scooter and helps you to plan your tours, including charging stops, in advance. The app is purely optional and not essential for using the scooter.
    To connect your scooter to your cell phone via Bluetooth, you need the VMAX E-SCOOTER app (available for iOS and Android).

  5. Pin lock

    All information on how to lock your scooter with a password or change the PIN can be found in our video:

  6. Kickstart or Zerostart

    This is what we call the two start modes of the scooter. We recommend Kickstart, especially for inexperienced riders. In this mode, the scooter does not start when you just press the throttle, but the scooter must already be rolling. In this mode, you start off as if you were riding a scooter and only operate the throttle when you are already rolling and both feet are securely on the footboard.
    In zero start, the scooter starts from a standstill. As the drive comes from the rear wheel, the front wheel can rise into the air if you have your weight on the back of the scooter.
    To switch between the two modes, simply go to the display settings.

  7. USB port on the steering bridge

    Your VX2 EXTREME offers you the option of charging your cell phone while riding so that you can also use the navigation on long tours. A USB-A port is installed underneath the left-hand control unit for this purpose. To use this connection, plug the cable and your cell phone into your scooter when it is switched off and only then switch your scooter on. This is the only way to activate the power supply to the port.