In this guide, we'll show you step by step how to adjust the folding mechanism on your VMAXVX5 PRO E-Scooter VX5 PRO .
Tools Required
- 5 mm Allen wrench
- 2.5 mm Allen wrench
Instructions
Loosen the large screw in the mechanism
First, loosen the large screw inside the hinge mechanism.
This screw serves as the basis for the subsequent fine adjustment of the hook.
Adjust the angle of the hook using the set screw
Next, use the small grub screw to adjust the angle of the hook at the end of the handlebar.
Adjust the tension of the folding mechanism
If you tighten the grub screw further, the folding mechanism will become tighter.
If you loosen the grub screw slightly, the mechanism will become looser.
Tighten the large screw again
After making the adjustment, tighten the large screw again.
Next, check to make sure the folding mechanism is neither too stiff nor too loose.
Check the result
After making the adjustment, check to see if the folding mechanism closes smoothly and if the handlebar is securely locked in place. Pay special attention to ensuring that there is no noticeable play and that the mechanism still operates smoothly.
Frequently Asked Questions
Here you'll find answers to frequently asked questions about this setting.
How can I tell if the folding mechanism needs to be adjusted?
Typical signs include play in the mechanism or a lock that is too tight or difficult to close. In such cases, it’s worth making a fine adjustment.
What happens if I screw the grub screw in too far?
If you do that, the folding mechanism may become too tight and difficult to operate. Therefore, adjust it only in small increments and check the result immediately after each adjustment.
What should I do if the game is still running even after I've closed it?
Carefully check all the steps again. If there is still noticeable play, the mechanism should be inspected by a technician.