Replace the front turn signals

Replace the display You're reading Replacing the front turn signals 2 minutes Continue Replace the front controls and turn signals
Tags

Replace the front turn signals

In this guide, we'll show you, step by step, how to replace the front turn signal on your VMAX E-Scooter .

Model VX2 Hub / VX2 Gear / VX4_2B / VX5 PRO
Time required approx.15 minutes
Difficulty Easy

Tools Required

  • 2.5 mm Allen wrench
  • Utility knife
  • Replacement part: Front turn signal
Before you begin, make sure your VMAX E-Scooter is E-Scooter . Work on a stable surface and have all your tools within easy reach.

Instructions

1

Turn off the turn signals

Loosen the screw below the turn signal using a 2.5 mm Allen wrench

Loosen the screw below the turn signal using a 2.5 mm Allen wrench.

Be sure to set the screw aside in a clean place.

2

Remove the turn signals

Carefully pull the turn signals off the handlebars

Carefully pull the turn signal out of the handlebars.

3

Disconnect the cable

Open the heat-shrink tubing and disconnect the connector

Carefully cut open the heat-shrink tubing with a utility knife and disconnect the plug.

4

Connect the new turn signal

Connect the new turn signal to the existing plug-in connector.

If available, slip a new piece of heat-shrink tubing over the connection.

5

Installing Turn Signals

Position the turn signals and screw them in place

Reattach the turn signal to the handlebars and secure it with the 2.5 mm Allen screw.

When assembling the unit, make sure that all screws are tightened properly and that no cables are pinched or damaged.

Check the result

After assembly, check that the turn signal is installed correctly and is working properly. In particular, test the flashing function and make sure it is securely fastened.

E-Scooter repairs, test your VMAX E-Scooter while it's stationary before using it again as usual in your daily life.

Frequently Asked Questions

Here you'll find answers to frequently asked questions about this repair.

What should I do if the turn signal doesn't work after I replace it?

First, check the connector. Often, it isn't fully plugged in. Also check to make sure the cables are connected properly.

Do I absolutely have to put the heat-shrink tubing back on?

Yes, if present, it protects the connection from moisture and ensures a longer service life.

Can I keep driving with a broken turn signal?

We recommend that you replace the turn signal as soon as possible, since it is an important safety feature when driving.

If you're unsure or need help, our local service teams are here to assist you.